Hydraulic Power Unit for Automobile Tail Plate

Product Uses

This hydraulic power unit for Automobile Tail Plate ，it provide lift, down,open and close function.

Technical Parameters

Product Advantage

The tailboard power unit is the core component of the automobile tailboard, which has the following advantages:

1.Strong carrying capacity: able to output large force and torque, suitable for loading and unloading of heavy cargo.

2.Easy to operate: it can be controlled by a light operating lever or button to reduce labor intensity.

3.Compact: Compact design for installation in the limited space of the vehicle.

4.Safe and reliable: with overload protection function to extend the service life of the equipment.

5.Simple maintenance: only the hydraulic oil and filter element need to be replaced regularly, with low maintenance cost.

6.Smooth operation: The characteristics of the hydraulic system keep it stable during operation and reduce cargo shaking and breakage.

7.Improve efficiency: complete the loading and unloading of goods quickly and improve the transportation efficiency.

Core advantages of tailboard power unit (hydraulic/electric): 

Strong power, high efficiency, safety and stability, easy installation, maintenance-free, wide adaptability, low noise and compliance. 

 1. Strong power, heavy load stability  -Mainstream 1 – 3 tons, heavy up to 5 tons, easy to lift heavy loads. -Hydraulically driven lifting is smooth without shaking, and the electric model has fast response, sufficient torque and smooth start and stop. -12V/24V vehicle battery direct drive, sufficient power, stable endurance, suitable for all kinds of trucks.

2. Efficient and labor-saving, speed up loading and unloading  -One-button/remote control operation for one person, instead of 2 – 4 manual handling, improves efficiency by 30% – 45%. -Fast lifting/turning action, 10 – 20 seconds for single loading and unloading, suitable for high-frequency logistics, express delivery and cold chain distribution. -The carriage on the ground is connected seamlessly, and the forklift can go up and down directly to reduce the loss of secondary handling. 

 3. Safe and reliable, protection in place  -Built-in overload/overflow/limit protection,Prevent overloading, falling and misoperation. -Hydraulic type is self-locking when power is off, and the board will not fall when power is off; electric type is dual power supply/spare battery, and it can still work when power is off. -Smooth operation, low noise ≤ 70dB, suitable for city/night operation. 

 4. Compact integration, simple installation and maintenance  -One-piece integrated design, small size and light weight, suitable for the narrow space at the rear of the truck. -Easy to install, fixed bracket + wiring, 1 – 2 hours to complete the modification. -The hydraulic model has good sealing and less leakage; the electric model is maintenance-free, only needs regular lubrication, and the maintenance frequency is reduced by 80%.

Notice

1.This power unit is S3 working type, can not work continuously, can work

repeatedly.

2.Before installation, please be sure the cleanliness of component like tank, tube

and fittings, without any impurities.

3.Viscosity of oil should be 15-68CST, should be clean and without impurities.

Suggest to use N46 hydraulic oil. If need to work all-weather, must use

aviation hydraulic fluid.

4.This power unit is horizontal installation.

5.After first work, oil tank should be checked immediately to see if there’s

enough oil.

6.After the first 100 working hour, hydraulic oil should be replaced. After that,

the oil should be replaced every 3000 working hours.

FAQ

Q What can I pay my order?

A We accept T/T  .

Q Do you have any certificate?

A We have passed CE certificate.

Q Can we design our own package or print our own logo?

A Yes! Package and logo will be made acording to your requirements.

Q Could we get small quantity samples?

A Yes! We understand the quality test is important and we are glad to make the sample for you. The MOQ is 1pcs.

Q Could we get small quantity samples?

A Yes,we can make one sample for your test.

Q How long is the production time?

A Generally the production time is 25 days.

Q What is the warranty?

A One year

Hydraulic Schematic