Oil Immersed Low Noise Hydraulic Power Unit with Manual Pump for Elevator
Product Description
Oil Immersed Low Noise Hydraulic Power Unit with Manual Pump for Home Lift
Motor: 3PH 220V/380V
Power: 2.2kw
Pump:12cc/r
Oil Tank:35L
Pressure:6MPa
With Manual Pump
Freight Elevator Low Noise Hydraulic Power Unit Core Advantages Noise and environmental benefits
1. Low operating decibel The conventional power unit is 75 – 85dB, and the low-noise model is controlled at 45 – 50dB, which is close to the volume of daily conversation. It is suitable for workshops, warehouses, supermarkets, buildings and other nearby areas to reduce noise disturbance.
2. Improve the working environment Long-term low noise can reduce hearing fatigue and irritability, improve working comfort, and meet the environmental protection standards of noise reduction in the plant area.
3.Wider application scenarios It can be installed in the corridor, beside the office area, underground garage and the machine room facing the street, and is not limited by noise.
Equipment and structure advantages
1.Shock absorption and noise reduction design Built-in shock absorption foot pad, silent motor, helical rotor pump, the whole machine has small vibration, the resonance of pipeline and valve group is greatly reduced, and the whole machine has stronger stability.
2. Longer component life After the vibration is reduced, the bolts, joints, seals and pipelines are not easy to loosen, crack and leak oil, the failure rate is reduced, and the maintenance frequency is reduced.
3. Run more smoothly There is no impact and abnormal noise when starting, stopping and lifting, and the freight elevator runs smoothly to improve the stability of loading.
Energy consumption and use cost
1. More energy efficient Quiet motor, optimized flow channel design, small power loss, power consumption slightly lower than ordinary model, long-term use of power saving.
2. Low maintenance cost Less vibration and impact, slower wear of seal, filter element, pump body and motor bearing, and longer replacement cycle of accessories.