Stroke 200mm Medical Bed Hydraulic Cylinder

Stroke 200mm Medical Bed Hydraulic Cylinder

Core structure and appearance characteristics

 -Appearance material: the whole is a white medical grade spraying shell, the end of the piston rod is provided with a blue protective cap, and the bottom is a double-lug + pin shaft installation structure, which is suitable for the hinged installation of the bed frame. -Integrated design: pump cylinder integrated structure, built-in manual pump core, no need for external hydraulic pipeline, can be lifted by rocker/pedal drive during operation. 

-Identification information: mark Φ25 × 200 on the side of the cylinder block, and specify the cylinder bore and stroke parameters.Advantages of medical scene adaptation 

 1. Safe and reliable: Built-in one-way hydraulic lock, instantly locked after stopping operation, to prevent the bed from sinking and ensure the stability of the patient's body position. 

2. Hospital friendly: white smooth coating + no exposed pipeline, easy to wipe and disinfect with alcohol/chlorine-containing disinfectant, no dead corner of cleaning. 

3. Operation is labor-saving: pure mechanical hydraulic drive, no electricity is needed, the body position can still be adjusted normally in power failure/emergency scenarios, and the medical operation is easy. 

4. Mute and smooth:Hydraulic oil damping buffer, gentle lifting process without impact, noise ≤ 45dB, in line with the requirements of ward silence.  Application scenario  -Ordinary nursing bed: control the back plate to lift, the legs to bend, and the bed body to rise and fall as a whole. -Sick bed in health care institution: suitable for low-frequency body position adjustment, with extremely low maintenance cost. -Outpatient examination bed: provides stable height and angle adjustment, compact structure and does not occupy space.  Bore 25 mm Stroke 200 mm Rated load 300 – 650 kg Operation mode: single action (driven by manual pump)