Wingspan Van Hydraulic Power Unit Hydraulic Power Pack
Product Description
Wingspan van hydraulic power unit hydraulic power pack
Model Number:
Brand Name:
Place of Origin:
Tank capacity:6L 8L 10L:
Motor Power:1hp 2hp 3hp 4hp:
HS Code:8412299090:
Motor Volt:12V 24V 48V:
6000 Set/Sets per Month
Exporting standard packing carton&pallet
Port
Qingdao
Lead Time :
7 working days
Core advantages of tailboard power unit (hydraulic/electric):
Strong power, high efficiency, safety and stability, easy installation, maintenance-free, wide adaptability, low noise and compliance.
1. Strong power, heavy load stability -Mainstream 1 – 3 tons, easy to lift heavy loads. -Hydraulically driven lifting is smooth without shaking, and the electric model has fast response, sufficient torque and smooth start and stop. -12V/24V vehicle battery direct drive, sufficient power, stable endurance, suitable for all kinds of trucks.
2. Efficient and labor-saving, speed up loading and unloading -One-button/remote control operation for one person, instead of 2 – 4 manual handling, improves efficiency by 30% – 45%. -Fast lifting/turning action, 10 – 20 seconds for single loading and unloading, suitable for high-frequency logistics, express delivery and cold chain distribution. -The carriage on the ground is connected seamlessly, and the forklift can go up and down directly to reduce the loss of secondary handling.
3. Compact integration, simple installation and maintenance -One-piece integrated design, small size and light weight, suitable for the narrow space at the rear of the truck. -Easy to install, fixed bracket + wiring, 1 – 2 hours to complete the modification. -The hydraulic model has good sealing and less leakage; the electric model is maintenance-free, only needs regular lubrication, and the maintenance frequency is reduced by 80%.
Double acting hydraulic power pack features:
1. Voltage: 12V/24V/36V/48V/60V/72V
2. DC Motor Power: 0.75KW-2.2KW/ 1HP 2HP 3HP
3. Volume: 1.5L-20L for oil tank
4. Oil tank: square / round / plastic / metal
5. Check valve and relief valve is standard parts; hydraulic lock&pressure-compensated valve is available
6. Pump: 0.4cc-8.0cc/r
7. Mounting: H (horizontal), V(vertical)
8. Reliable,low noise, high efficiency
Notes:
1. This power unit is of S3 duty, which can only work intermittently and repeatedly, i.e., 30 seconds on and 270 seconds off.
2. Make sure all the hydraulic parts cleaned before mounting the power unit.
3. Our products' warranty period is one year from delivery.
The product should be well protected from moisture and must be treated with care during storage, transportation and operation.